Month: March 2017

How To Become a Master Bladesmith

When we think of a Master Bladesmith, one vision that comes to mind may be of a person hammering on heated steel to form one of the strongest blades known to man. As this is what they have worked their whole life’s for, there may be good reason behind that. But, how does one become a Master?

To start the journey of being a Master Bladesmith, a person will need to enjoy making blades as more than a hobby. Blacksmithing will need to be a way of life, as it requires lots of experience, dedication and dexterity to become a Master Bladesmith.

First, becoming an apprentice is key. Here, you will undergo learning and education in the ancient ways of Blacksmithing. This is where you will learn all the traits needed to advance your career into being a Master. Once ready, an apprentice is taken through a series of trials to test out their craftsmanship.

First, the blade must cut a hanging piece of loose rope, in a single swipe. Second, the blade will be used to chop through multiple pieces of 2×4 wood, followed by the final test of pending the tip at a 90-degree angle. These test for sharpness, chipping or cracking, and breakage. If any of these occur, the blade will be a failure and the apprentice starts over.

If a blade does make it through these three tests, it will still be ruined by the final test. The next trial requires five blades being created and judged by a group of peers, only then do they step closer to the title of Master Bladesmith. Which, there are only about 200 positions of Master Bladesmith worldwide, good luck finding an opening.

Categories: Uncategorized

Best Hunting Knife

If you are looking for a hunting knife and want to know some of the best on the market, then you have come to the right spot. The following knifes are known for remaining sharp for long periods so they are ready when you need them. From pig skinning, carpet cutting, and leather slicing to still being able to cleanly slice through the page of a magazine, these are your best bets.

Browning Featherweight Fixed Semi-Skinner – $73

This knife measures just over 8 inches with a blade just under 4 inches. The total weight is only 7.6oz and made from AUS-8A steel. It’s got a hollow-ground drop point skinner, and comes with a nylon sheath to protect it from the elements. The down side is, the handle can be a little slick, but the deep finger grooves make up for it.

HelleSylvsteinen – $140

This design measures 9 ¾ inches with a blade nearly 5.5 inches and weighs just 5.17oz. This makes it light enough to carry without an issue. The blade is made with high carbon steel between 18/8 stainless steel to give it the edge retention and hardness you need. It comes with a leather sheath, which will ensure your blade stays in great shape.

Puma SGB Deadwood Canyon – $50

If you are on a budget, this is a great option. Measuring a full 8 inches, with the blade measuring 3.8 inches, it weighs just 4.6 ounces. The blade is created with 440A stainless steel, giving you a good quality cut every time. It also comes with a full leather sheath for protection.


Categories: Uncategorized

Who are the best custom knife makers

If you have been looking for some renowned custom knife makers in the world, that are unmatched, then you need to check out these expert craftsmen. Check out knives by Rick Hinderer, Chris Reeve, and even Duane Dwyer as well as other types of craftsmen out there.

These are the knife makers that have spent a lot of blood, sweat, and tears as well as time in fine tuning all of their designs in an unparalleled variety of knives that combine great construction and craft with amazing artisanship. You will often see work of legends such as Ken Onion, Brian Tighe, and William Henry in high quality brands. A custom knife maker will always have their own special set of characteristics in their products as well as various categories of knives to the table. Most of custom knives are made from Damascus steel and will use only the best materials out there.

If you are a savvy knife collector, then you have to have at least one custom knife in your arsenal of collectibles. From folding knives to high end show pieces to even functional knives, the one person you will want to make your knife is going to be Brian Fellhoelter. He has established a well known name for himself in the 10 years that he has been making custom knives. He has many awards and only custom designs top quality outdoor knives that you can put to the test. The creative and innovative outdoor designs have blended functionality and aesthetics together. If you wanting someone who has more than 10 years, then look at Hawaiian knife maker, Scot Matsuoka. He began making knifes at age 9 and he has only improved as the years passed by.

Categories: Uncategorized

What’s the best bowie knife?

When it comes to the bowie knife, choosing the best can be a challenge because there is not specific definition. The original design was created by Col. James Bowie, who wanted a portable fighting style knife that needed to be longer than dagger, and shorter than a saber. It’s been stated by historians that a bowie “needs to be long like a sword, sharp like a razor, wide enough to paddle, and heavy like a hatchet”.

With all this, below are three of the top bowie knifes on the market:

Stag – $131

This one is produced by PUMA, with a razor style blade that features a 6-inch blade and weighs in at 8 ounces. You will find the nylon sheath helps keep it protected from the elements. With a full tang design, you can ensure the handle will withstand anything you need it too.

BK9 – $134

This design is produced by Kabar and also has a razor style blade that measures 9 inches in length and weighs in at 1 pound. It also comes with a nylon sheath that gets the job done and keeps your sword ready for use. It also has a full tang, so you don’t have to stress over the handle. If you need a longer blade than the Stag offers, this is a good option.

Natchez – $699

Produced by Cold Steel, this design also features a razor style blade and measures 11 ¾ inches, but weighs in at 20oz. Making this the longest and heaviest on the list. The sheath is made of leather, which is often preferred over nylon. It is also a partial tang design, and the most expensive on the list.

Categories: Uncategorized